PC 700 - Technical data

		PB 700	PC 700

Strokes	X / Y / Z	200 / 170 / 120 mm	250 / 120 / 170 mm

Feed rates	fast rate X / Y / Z	0 to 5000 mm/min	0 to 5000 mm/min
	feed rate	12 m/min	12 m/min
	resolution	0,001 mm	0,001 mm

Bar tilting	manual	0 à 20°	–

Bar feed	pneumatic	25 mm	–

Standard coolant tank	capacity	100 l	–
	flow	40 l/min	–

Mist application			MECANEX
			4 nozzles, 1.5 bars max.

Drive systems	motors	AC motor	AC motor
	closed-loop control	digital	digital
	ball screw ø	20 x 4 mm	20 x 4 mm

Standard spindle	speed	2000 à 12 000 min-'	5000 à 12 000 min-'
	mechanical power	1,4/3,4 kW (100%/25% ED)	0,37 kW

Collet	toolholder	ESX 20 / HSK 32	ISO 10
	clamping ø	1 to 13 mm	0,5 to 7 mm

Configurations	front mounted	4 spindles	–
	lateral mounted	2 spindles	–
	vertical mounted	2 spindles	–

Numerical control		NUM 1020 W	NUM 1020 W

Connections	installed power	6 kVA	4 kVA
	voltage	3 x 400 V / 50 Hz	3 x 400 V / 50 Hz
	pneumatic pressure	6 bars	6 bars

Weight		900 kg	750 kg

Dimensions	L x W x H	1500 x 1300 x 1750 mm	1500 x 1000 x 1750 mm

Optional equipment

		PB 700	PC 700

		• Spindle module	• HF spindles
		• NC dividing head	• Table with T -slots
		• Bar tilting	• Multiclamping
		• Bar-feed	• Oil mist extractor
		• Temperature control	• Tool breakage detection
		• Tool presetting probe	• Dynamic laser control
		• Oil mist extractor
		• Tool breakage detection
		• Warming cycle
		• Dynamic laser control